Radar85
23-09-2012, 08:16 PM
I am having issues with a piece of equipment. I am an apprentice and need help on this one.
The unit is an york xp060 rooftop, the thermostat is a honneywell focus pro 5000. The T stat has a terminal for O like any other but the york does not. it has an itelligent board that energizes o for you. So I am not sure where to wire this so it will function properly. Also it has to work with a 20 kw electic heat strips.
the terminals on the stat are basic, R-C-Y-G-Aux/E-L-O/B. The terminal on the York are R-C-Y1-Y2-W1-W2-X-G.
Any help would be appreciated
The unit is an york xp060 rooftop, the thermostat is a honneywell focus pro 5000. The T stat has a terminal for O like any other but the york does not. it has an itelligent board that energizes o for you. So I am not sure where to wire this so it will function properly. Also it has to work with a 20 kw electic heat strips.
the terminals on the stat are basic, R-C-Y-G-Aux/E-L-O/B. The terminal on the York are R-C-Y1-Y2-W1-W2-X-G.
Any help would be appreciated