View Full Version : Frigoblock G17 with Frigoblock FK13
BnTir
05-09-2012, 09:47 PM
Hello
I have a problem with my refrigerator. My generator (G17) is lost on the street. I don't have any electrical drawings or schematics from generator to refrigerator...
My wire was cut, and I must re-connect this generator. Maybe anyone have a schematics for this device, and can you help me?
My e-mail: pirs.transport@gmail.com
BnTir
05-09-2012, 09:48 PM
This is link to photos with generator http://www.elektroda.pl/rtvforum/viewtopic.php?t=2270481&highlight=
It should be easy without a schematic. If you carefully cut back the grey insulation on both wires into the generator you should see that the are numbered?
Match the numbers up to the cable still connected to the truck and al should be good.
Best regards,
djbe.
BnTir
07-09-2012, 08:03 AM
Yes, I know about numbers on the wires, but a few wires was cut from generator...
But thanks for help
I see now looking more closely at the pictures your problems. I will look to see what I have that may be able to help you.
dan22y
17-09-2012, 07:11 PM
Hello,
I also look for the schematics for the generator from Frigoblock FK13, because doesn't work, only with power supply 3x380.
I've checked the diodes and looks ok.
clivemtk
17-09-2012, 09:44 PM
check your e\mail
BnTir
18-09-2012, 11:48 PM
i've a fk 11 refrigeration, it's my fault, sorry
but your e-mail is very help me, now i know how it's working:)
maybe have you schematic connectivity from refrigeration fk11 to generator g17 or similar?
slavisakukic
05-10-2012, 07:46 AM
Hello
Could you send this schematic to me as well? I have one g17 not working and not able to figure it out.
BnTir
08-10-2012, 07:14 PM
Hi
I connected my generator, and works:) When, anyone have a problem, I will help if I can:)
BnTir
08-10-2012, 07:18 PM
slavisakukic give me your e-mail
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.