PDA

View Full Version : Inset glassdoors for cold room



Peter_1
28-08-2012, 12:54 PM
Anyone knows a brand who sells glassdoors (+/- 800 x 500 mm) in a frame which can be easily inserted in a hole which was made in a coldroom panel?
We have a request for a self service system with increased cooling system which can hold temperatures around 2°C in an ambient of 32°C

chemi-cool
28-08-2012, 03:25 PM
Its a bit tricky, you will have to make two frames on the panel and insulation between them. on that insulation, you will have to connect your glass door, any galvanic connection between the two frames will cause condensation on the out frame, I would go for triple glass with inert gas in between.

al
28-08-2012, 08:54 PM
Peter, i use them for self service bottle coolers in off licence, i can give you a contact here for them, 800mm door in it's own frame, they also provide the racking.

al

Fun_cooler
29-08-2012, 07:58 PM
What is the thickness of the panel? you want just one piece?

THE DUDE
31-08-2012, 11:39 PM
I have had very good results using Anthony door frames. Not shure if they are available in your area tho.