Chris2005
08-08-2012, 07:05 PM
Hi All
I have a problem with a thermo king V300,
The cab controller is lighting up but the green light for cooling will not come on .
I have found the HP switch that is located on the high side pipe of the compressor on the roof was all black and burned so replaced this but made no difference.
I then checked the fuses on the relay board and the 3 amp fuse was blown replaced this thinking everything would be ok and still nothing.
There is 28 volts at the 25 amp fuse at the relay board but thats as far as it goes.
Regards
Chris
I have a problem with a thermo king V300,
The cab controller is lighting up but the green light for cooling will not come on .
I have found the HP switch that is located on the high side pipe of the compressor on the roof was all black and burned so replaced this but made no difference.
I then checked the fuses on the relay board and the 3 amp fuse was blown replaced this thinking everything would be ok and still nothing.
There is 28 volts at the 25 amp fuse at the relay board but thats as far as it goes.
Regards
Chris