stealth987
26-05-2012, 11:40 AM
Hi Guys,
Its my first post here and I'm a bit of a noob when it comes to refrigeration, but I think you guys have the know how to point me in the right direction. I have a small refrigerated body fitted to my mazda BT-50 light truck and It was working fine up until last week when it started to struggle getting down to temperature. The unit is rated down to -18°C (-4°F) and I've noticed when my evaporator coil starts to get cold I notice now it only frosts up on one side, where it used to frost up all the way across. We are in the middle of winter and I can barely get -12°C, even on a long trip
Any ideas on what might be the problem? All the fans are working as per normal, and the compressor was recently replaced.
http://members.optusnet.com.au/jason.napper/IMG_20120523_154645.jpg
Its my first post here and I'm a bit of a noob when it comes to refrigeration, but I think you guys have the know how to point me in the right direction. I have a small refrigerated body fitted to my mazda BT-50 light truck and It was working fine up until last week when it started to struggle getting down to temperature. The unit is rated down to -18°C (-4°F) and I've noticed when my evaporator coil starts to get cold I notice now it only frosts up on one side, where it used to frost up all the way across. We are in the middle of winter and I can barely get -12°C, even on a long trip
Any ideas on what might be the problem? All the fans are working as per normal, and the compressor was recently replaced.
http://members.optusnet.com.au/jason.napper/IMG_20120523_154645.jpg