Purvakku
16-02-2012, 07:01 PM
Hi,
I'm looking for two 2nd hand Compressor Assemblies (any decent make) to suit the following Blast Chiller/Freezers (Pics attached).
1) Compressor Assembly: Z9 4DA-200X 20.0hp, Duty 25.5kwatt.
for Williams Walk-In Blast Chiller+Freezer with following specifications:
Model No.: W.B.C / B.F = (WBCF 240)
Sr. No. 0007251970
Volts 415
Hertz 50
Phase 3
Amp 11
R404A
2) Compressor Assembly: V6 3DS-150X 15.0hp, duty 21.1kwatt
for Williams Walk in Blast Chiller with following specifications.
Model No. WBC160 (No Pod)
Sr. No. 0310/367220
Volts 415
Hertz 50
Phase 3
Amp 6
R404A
Ideally, the assembly should include 1 off Crankcase and oil sep heater, Fan HP switch, liquid line drier and sight glass, oil separator with Non return valve each.
If you have any 2nd hand/refurbished compressor units to match above specs, please contact on 07854365336 or anshuman.verma@hotmail.com with reasonable price indication.
Thanks and regards,
Anshuman
I'm looking for two 2nd hand Compressor Assemblies (any decent make) to suit the following Blast Chiller/Freezers (Pics attached).
1) Compressor Assembly: Z9 4DA-200X 20.0hp, Duty 25.5kwatt.
for Williams Walk-In Blast Chiller+Freezer with following specifications:
Model No.: W.B.C / B.F = (WBCF 240)
Sr. No. 0007251970
Volts 415
Hertz 50
Phase 3
Amp 11
R404A
2) Compressor Assembly: V6 3DS-150X 15.0hp, duty 21.1kwatt
for Williams Walk in Blast Chiller with following specifications.
Model No. WBC160 (No Pod)
Sr. No. 0310/367220
Volts 415
Hertz 50
Phase 3
Amp 6
R404A
Ideally, the assembly should include 1 off Crankcase and oil sep heater, Fan HP switch, liquid line drier and sight glass, oil separator with Non return valve each.
If you have any 2nd hand/refurbished compressor units to match above specs, please contact on 07854365336 or anshuman.verma@hotmail.com with reasonable price indication.
Thanks and regards,
Anshuman