POLAR T316 icemaker

[DRISCOLLS]

This small icemaker makes thimble shaped ice. The machine does not cut out to initiate defrost until the ice thimbles have fused into one block. Assume the cut out /defrost probe that sits in the water tray is faulty (No wiring diagram ) Where can l get a probe

[chemi-cool]

Defrost on ice machines starts on a timer or suction pressure\temp. I don't think its done by a probe.
water temp is near 0C most of the time.

install monkey is in charge of manuals.

[install monkey]

i have 1 instruction manual for polar-and its the t316!!
https://rapidshare.com/files/2106550930/Polar_Ice_Cube_Maker_T316.pdf; bit vague-ill keep looking

[charlie patt]

only three things will cause that 1/ the ice thickness sensor 2 / the pcb is locked on cooling 3/ the water circulation pump is not working or the gauze is blocked with dirt not allowing water flow ifyou order a sensor order a bin motor and pcb you will need it in the next twelve months

[EasyEquipment]

The ambient temp is too cold for machine to work, so the ice fuses together.
Suggest moving to a warmer place. The ice machines [advert removed] do not work at less than 6C