password Eliwell ID961

[ena_smiley]

Hi, new here... hope to find some help and advice

how can I disable password on Eliwell ID 961... Password is set to 16 but I want to disable it so that I don't have to enter it each time I go back... I can't find it anywhere here on forum, also googled it, but can't find the way to disable the pw.

Help pleasee :) Kind of complicated device for a woman :confused:


Thanks :D

[install monkey]

..........

[Brian_UK]

Hi and welcome.

If your controller is an ID961 and you can adjust parameters then select PA1 and set it to 0 (zero).
Instructions...
http://www.hawco.co.uk/userfiles/MediaLibrary/ID961ENGTEC.pdf
(http://www.hawco.co.uk/userfiles/MediaLibrary/ID961ENGTEC.pdf)
If you have an ID961LX then you have a PA1 and PA2 to play with...
Instructions...
http://www.hawco.co.uk/userfiles/MediaLibrary/ID961LX-eng42002.pdf

[Magoo]

From memory most elliwell default access codes are 220, unless some one has changed it.

[al]

IM

Are those your daughters you are trying to marry off??

al

all repped out and nowhere to go....

[install monkey]

no al "11" haha,i posted how to lock the controller and how to unlock it!! maybe i was influenced by alcaholic flavours!

IM

Are those your daughters you are trying to marry off??

al

all repped out and nowhere to go....