tk stirling fault codes

[mattym]

would any body have the fault codes and info on a thermo king sterling unit thanks in advance matt

[gravy258]

http://www.kalotti.com/tkcode.pdf for the codes

what other info would you like to know

[mattym]

how to put the unit through a pre trip and clear the faults and that sort of stuff, i work on mainly carrier units as the company i work for is a sub dealer any help and info is greatly appreciated thanks

[tony2009]

a. Place the On-Off switch in the ON position.
b. Clear any alarms.
c. Press and hold the TK key for at least 3 seconds.
• PRE TRIP will appear on the display.
d. Press the ENTER key while PRE TRIP is displayed.
• PRE LOAD will appear on the display and the PRE TRIP test will start.
• PRE AMPS will appear on the display indicating that the amps check is running and the PRE TRIP has started.
• The amps check will continue for several minutes, then the unit will start automatically and the operational tests will be performed.
4. When the PRE TRIP test is complete, PASS, CHECK, or FAIL will appear on the display until a function key
(e.g., SELECT or ENTER) is pressed. Continue as follows:
• PASS—The unit is running and no alarms have been recorded. The unit has passed the PRE TRIP.
• CHECK—The unit is running but Check Alarms have been recorded.
• FAIL—The unit has shut down, recorded Alarm Code 28, and possibly recorded other Shutdown Alarms.

[tony2009]

View the Alarms with the CODE key
a. Correct the alarm conditions.
b. Clear the alarms with the CLEAR key.
c. Repeat the PRE TRIP test until PASS appears (the unit passes the PRETRIP).
6. Recheck the setpoint.

[mattym]

spot on guys thanks