PDA

View Full Version : Whirlpool K40 Ice machine



White Hart
25-08-2011, 11:27 AM
I have a K40 ice machine & it is making ice OK but the bin is filling up with water & leaking out. The ice seems to be melting inside the bin, any ideas what would cause this.

Cheers

B G Scott
25-08-2011, 04:54 PM
A few things to try first.

Is the water valve shutting off the water after the harvest cycle and also check that the main bin drain is clear

Is the drain plug water tight in the pump sump, if you reach in the machine it is on the bottom of the sump on the right hand side of the bin if you get close and at the door height you can see the drain plug.

Is the drain tray under the evaporator installed so that the water runs back into the sump.

If the ice is melting this also suggests that you may still be getting water from the mains via a defective water valve.

tsman
25-08-2011, 05:32 PM
remove drain outlet and blow up drain water from hose pipe preferable your drain is blocked

r.bartlett
25-08-2011, 09:54 PM
My dad would always say "Tadley God help us" when we went through Tadley on the way to somewhere nice