mack
23-08-2011, 10:13 PM
Hi Guys been to look at Mitsubishi SRC50ZD-S R410 inverter split unit the fan starts so does the compressor momentarily then the compressor shuts down then starts again after a minute or so, slowly at first then starts to wind up for a couple of minutes, then shuts down completely. It will rest for 5 mins then repeat the process. I have 1 blinking red light on outside board & 6 flashes on timer light on inside unit. Gas seems to be ok but compressor doesn't run for long enough to gauge running pressure. Any ideas anybody. Thanks Mack.