edi_197677
29-07-2011, 05:19 PM
hi all,
thanks for previous answer from mr. norseman.
the oil logging problem has solved already, cause i try to install heater at the cappilary
line its work well but depend on when that chamber reached the set point. (after compressor turn off and heater works almost 2 minutes).
my questions is :
a. do i realy need n pentane work with r 1150 to solve the oil problem.
b. n pentane can works together with r 1150
c. what kind of problem will come if we mix it both with the percentage.
thanks,
Best Regards,
Edi.
Batam Indonesia.
thanks for previous answer from mr. norseman.
the oil logging problem has solved already, cause i try to install heater at the cappilary
line its work well but depend on when that chamber reached the set point. (after compressor turn off and heater works almost 2 minutes).
my questions is :
a. do i realy need n pentane work with r 1150 to solve the oil problem.
b. n pentane can works together with r 1150
c. what kind of problem will come if we mix it both with the percentage.
thanks,
Best Regards,
Edi.
Batam Indonesia.