superwhip
25-07-2011, 10:15 AM
Hi All,
I bought the top half of a Carpigiani Super Uno ice cream machine to replace my Carp Van 1 in a ice cream van and a new bock compressor.
Inside the top of my machine i have two Blue Coils units on top of valves, one is for the hopper and one for the beater.If i connect these two to the compressor , the hopper freezes and the beater very little and not enough to make ice cream. If i disconnect the coil going to the hopper i have no problem but the mix then is not cold in the hopper.
There is a dial on the side which goes into the hopper so i think this controls the temperature but im not sure if this is working, so i dont know if this is the problem.
I turned the valve which controls the gas into the machine but this seems to just make the compressor go white.
There are no temp control dials on top of the coils so im stuck on how to have them both wired up.
Im not in the UK and there are not many guys here who work on ice cream machines, please help and many thanks.
I bought the top half of a Carpigiani Super Uno ice cream machine to replace my Carp Van 1 in a ice cream van and a new bock compressor.
Inside the top of my machine i have two Blue Coils units on top of valves, one is for the hopper and one for the beater.If i connect these two to the compressor , the hopper freezes and the beater very little and not enough to make ice cream. If i disconnect the coil going to the hopper i have no problem but the mix then is not cold in the hopper.
There is a dial on the side which goes into the hopper so i think this controls the temperature but im not sure if this is working, so i dont know if this is the problem.
I turned the valve which controls the gas into the machine but this seems to just make the compressor go white.
There are no temp control dials on top of the coils so im stuck on how to have them both wired up.
Im not in the UK and there are not many guys here who work on ice cream machines, please help and many thanks.