Thermo King's Catalogue software?

[reeferj]

I have the windows 7 64 bit OS, Tony gave me the software but won't work on the windwos 7 64bit OS, anyone has the new catalogue software?

[clivemtk]

did you tell tony you are running win7

[reeferj]

yes, I installed a virtual machine on win7, it worked not very well, sometime it cracked. I have a very old notebook, but too old to use on jobsite.

[tony2009]

I don't remember it being mentioned that it was a 64bit OS, but if it was, I would have mentioned that the software is designed specifically for XP, so if it is running in a Windows 7 environment, firstly it would need to be a minimum of the Professional version and in 32bit. To my knowledge, all industry software is designed primarily for XP but will run in a Windows 7 (32 bit) environment. Personally, I can't see any reason why it shouldn't run in a 64bit OS but not having tried it, I would never guarantee it.
There is no version of that software designed for 64bit, so if it won't run, then unfortunately, it won't run. A later version of that software will only include additional unit models only; they are not software companies, so their only interest is in making the information available to those who need it. As a general rule, dealers don't normally use 64bit in their systems, usually XP. If they are running Windows7, it would be expected to be the 32bit variant.
Vista is a bit of a non-event for some of the software, in my experience; especially Carrier software (ie; Reefer Manager or Tru Tech). Any Vista laptops we've had, we've ended up converting back to XP where we can.

I apologise if I have mislead you in any way, that is never my intention.

[reeferj]

thanks tony. yeah, i just tried to put the old system on now. hopefully it works.

[nikolas22]

tony hi,
could you please pass it on to me as well?? my email is nikpoly@hotmail.com
thanks in advance.

[tony2009]

Check your email; Tone....

[nikolas22]

tony,

thanks

working on it at the moment.

[Oxotnik]

Hi, Tony!
Could you send catalog me too: gritsuk.v@gmail.com
Thanks.

[moggy66]

now you started somthing Tone

[reeferj]

ha ha, Tony, I apologized for this inconvenience!!!!!!!!!!!!!!!!!!

[tony2009]

That's fine.

[edwinmochi154]

hey tony could you please give it to me?
is that software can do compressor selection too?
thank you for your help

[edwinmochi154]

my email is edwinmochi154@yahoo.com

[cristi]

hey tony could you please give it to me crystyevelin@yahoo.es

[GREEK_REF]

tony could you please give it to me info@firstclima.gr

thanks in advance

[msfrance]

hi tony, could you please send it to me too?
my email: m.so@msfrance.fr

with best regards,

[djbe]

Me, me, me, me :o

(joking Tony, I don't need it, hope you are well?)

[jakemigz]

Hi Tony would you mind to send me those software as well here is my email address; rebartolay@yahoo.com also I need a service manuals for SB II Trailer and a wiring diagram as well. Cheers!

[giath]

hi tony ....
could you please to send it to me too, thanks alot indeed.
That's fine.

[johnatr]

Hi Tony, hate to ask, but would it any trouble to send a copy to me as well? Thanks in advance
atr.ttservices@hotmail.com

[giath]

Hi Tony ....
would you please to mail me, too.
thank you in advance
giath2008@hotmail.com

[smotr]

I don't remember it being mentioned that it was a 64bit OS, but if it was, I would have mentioned that the software is designed specifically for XP, so if it is running in a Windows 7 environment, firstly it would need to be a minimum of the Professional version and in 32bit. To my knowledge, all industry software is designed primarily for XP but will run in a Windows 7 (32 bit) environment. Personally, I can't see any reason why it shouldn't run in a 64bit OS but not having tried it, I would never guarantee it.
There is no version of that software designed for 64bit, so if it won't run, then unfortunately, it won't run. A later version of that software will only include additional unit models only; they are not software companies, so their only interest is in making the information available to those who need it. As a general rule, dealers don't normally use 64bit in their systems, usually XP. If they are running Windows7, it would be expected to be the 32bit variant.
Vista is a bit of a non-event for some of the software, in my experience; especially Carrier software (ie; Reefer Manager or Tru Tech). Any Vista laptops we've had, we've ended up converting back to XP where we can.

I apologise if I have mislead you in any way, that is never my intention.


all what you have to do is click right button on TK software and go to properties and them chose the option run with compatibility of win XP... that is all...;

[mre212]

Hi there,
Can i get Thermo King's Catalogue software also?
Email: r.e951 @yahoo.com
Thanks

[mre212]

Email: r.e951@yahoo.com

[mini2mara]

Hi Tony ....
may i ask you to mail me, too. ..please
thank you in advance

[mini2mara]

email:mini2mara@gmail.com

[fouad]

email : ibadouallah@hotmail.fr

Thanks Tony

[incar]

hi tony, could you please send it to me too?
my email: stefano.crescenzi@gmail.com (m.so@msfrance.fr)

with best regards, thanks in advance.

[neznam]

hi Tony ....
could you please to send it to me? thank you in advance thanks
misoc04@hotmail.com