tony2009
10-03-2011, 11:43 PM
Guys;
I have a customer with a problem with an LRT-I which when the setpoint is set, continues to drop in temperature. I believe that setpoint is normally around 17C, but as mentioned, it continues to drop once it has reached setpoint.
I understand that the unit has had a new controller fitted, but the original chip has been used.
Any suggestions?
Regards; Tone
I have a customer with a problem with an LRT-I which when the setpoint is set, continues to drop in temperature. I believe that setpoint is normally around 17C, but as mentioned, it continues to drop once it has reached setpoint.
I understand that the unit has had a new controller fitted, but the original chip has been used.
Any suggestions?
Regards; Tone