Theos62
01-01-2011, 01:14 AM
Hi,
I was wondering if anyone could help with some tips to a E0 problem on a Daikin split system. Model RY140KUY1 External Unit and FDY140FV1 Internal Unit.
The E0 showed up about 3 weeks ago, so I re-set the unit at the mains and each time the E0 returned. So I turned off the unit overnight at the mains and when I tried it the next day it showed a H3. Called out the Daikin tech and he found a lose connection in the outdoor unit on the main board to the High Pressure switch.
It then worked OK for about two weeks and now is showing up E0 again. I tried reseting it and it will run for about 2 minutes then goes to E0. I turned it off from the mains overnight and then it ran for about 12 hours then E0. Turned it off from the mains for 2 hours and it will only run for 2 minutes, then E0.
My initial guess is another lose connection so I will check it over. Just wondering if anyone has any tips. Appreciate any help.
Might just be a heat sensing gremlin, as its another HOT day in Sydney.:(
Thanks.
Joe
New Poster....
I was wondering if anyone could help with some tips to a E0 problem on a Daikin split system. Model RY140KUY1 External Unit and FDY140FV1 Internal Unit.
The E0 showed up about 3 weeks ago, so I re-set the unit at the mains and each time the E0 returned. So I turned off the unit overnight at the mains and when I tried it the next day it showed a H3. Called out the Daikin tech and he found a lose connection in the outdoor unit on the main board to the High Pressure switch.
It then worked OK for about two weeks and now is showing up E0 again. I tried reseting it and it will run for about 2 minutes then goes to E0. I turned it off from the mains overnight and then it ran for about 12 hours then E0. Turned it off from the mains for 2 hours and it will only run for 2 minutes, then E0.
My initial guess is another lose connection so I will check it over. Just wondering if anyone has any tips. Appreciate any help.
Might just be a heat sensing gremlin, as its another HOT day in Sydney.:(
Thanks.
Joe
New Poster....