Crm pastomix 60 sw

[Paul J]

During the cycle this machine should heat up to 85 degrees C then switch to cooling but about a minute into the heating cycle the element contactor drops out and the display reads A-- does any one out there have fault codes for this:cool: cheers Paul

[9ballrnnr]

I believe Stoelting is handling CRM equipment now. Steve is the guy in the parts dept. that you need to talk to. I believe "A" means that one of the limits has opened but I'm not positive. There should be a pressure control mounted near the glycol pump (glycol pressure) and another one for head pressure. Good luck.