troymedhurst
29-11-2010, 08:43 PM
Hi I have been looking at a 30gh flotronic 2 and the unit goes into mode 16 (slow changeover mode)
I have checked manual but no real explanation. I am not sure if it is doing this because I have a faulty E.W Temperature probe reading 23c, when actually 11c.
Any explanations greatly recieved.
Thanks in advance
I have checked manual but no real explanation. I am not sure if it is doing this because I have a faulty E.W Temperature probe reading 23c, when actually 11c.
Any explanations greatly recieved.
Thanks in advance