Fujitsu AOT36R Error Code E:0F

[o_total]

Hi All,

I have the following code appearing after a short run time on an existing system that has been in for approx 1 year...but has not been used for the last 6 months.

E:0F Discharge pipe temperature abnormal.

From what I have been able to find on this site (very helpful) this could mean one of the following.

Shortage of gas
The temp probe is out of calibration
Comp bearings are wearing out.

Does this sound reasonable?

I am hoping that it is going to be a shortage of gas.

Thanks Brett.

[martinw58]

most likely short of gas

[Hans008]

had the same fault on a fijitsu. It was indeed short of gas.
Compressor should be ok if its only 1yr old