PDA

View Full Version : Xarios 350



coolincab
28-10-2010, 09:28 AM
I was wondering if anyone would have a wiring diagram for a Xarios 350.
I have a problem with the Evaporator fan which only
work intermittently.
Would be grateful for any help or suggestions.

Thanks
Mike

cadwaladr
28-10-2010, 07:10 PM
the problem will be the connections at the micro, the multi plug, the pins burn,i link them bypassing the plug that works for me.

coolincab
28-10-2010, 07:46 PM
i did clean the pins & connectors at the large multi connector there was 1 fan workin afterwards but not certain that this is the problem wanted to know if all the evap fan wires go direct to the ecu
thanks

cadwaladr
28-10-2010, 11:46 PM
to be honest not 100% but i would guess so,how many fans on the evap?

abbsnowman
29-10-2010, 01:39 AM
cadwaladr, do you have a wiring schematic for this?

coolincab
29-10-2010, 11:54 AM
just the 2 evap fans
no i dont have the schematic drawing

abbsnowman
29-10-2010, 06:58 PM
You have mail..

coolincab
30-10-2010, 10:06 AM
You have mail..
coolincab@fsmail.net

abbsnowman
30-10-2010, 05:47 PM
I sent it. Did you not recieve?

djbe
30-10-2010, 09:48 PM
i did clean the pins & connectors at the large multi connector there was 1 fan workin afterwards but not certain that this is the problem wanted to know if all the evap fan wires go direct to the ecu
thanks

They do go back to the ecu direct.