Modern Slate
21-10-2010, 08:36 PM
We are setting up a new injection molding machine facility in Michigan and need to cool our molds with 45-50F degree water.
We currently have 2 molds and machines that require apporx. 25 ton each of cooling.
However, we also have future plans for additonal loads (within 1 year) and thus want to make sure we do this project right the first time.
I'm looking at early 2000 model chillers (Crarrier and Trane) and am thinking about a 75-100 ton unit.
I have a line on an unused 2003 Carrier GXN080 chiller and am wandering if this is a decent make/model.
We are plannign to have a 500-1000 gallon insulated pump tank also.
Thanks in advance for your help.
Brian
We currently have 2 molds and machines that require apporx. 25 ton each of cooling.
However, we also have future plans for additonal loads (within 1 year) and thus want to make sure we do this project right the first time.
I'm looking at early 2000 model chillers (Crarrier and Trane) and am thinking about a 75-100 ton unit.
I have a line on an unused 2003 Carrier GXN080 chiller and am wandering if this is a decent make/model.
We are plannign to have a 500-1000 gallon insulated pump tank also.
Thanks in advance for your help.
Brian