pwned
20-09-2010, 07:27 AM
Old design: 1989 RRGG:
-return-->(blower)-->clamshell gas heat exchanger-->evaporator--> supply
New design: 2008 ish RRNL:
--return-->evaporator-->(blower)-->tubular heat exchanger--> supply
So, the old design had everything on push side and evaporator was placed after the heat exchanger.
New design pulls through evaporator, then pushes through through heat exchanger.
What are the pros and cons of the two designs?
The new design seems to be built a lot sturdier, by the way.
-return-->(blower)-->clamshell gas heat exchanger-->evaporator--> supply
New design: 2008 ish RRNL:
--return-->evaporator-->(blower)-->tubular heat exchanger--> supply
So, the old design had everything on push side and evaporator was placed after the heat exchanger.
New design pulls through evaporator, then pushes through through heat exchanger.
What are the pros and cons of the two designs?
The new design seems to be built a lot sturdier, by the way.