retrofitting

[johnnymac]

Hi new to this site and 3rd apprentice so forgive if I make a mess of it. We have an assignment on retrofitting and since I have extremely little of it I was wondering is there any sites that show, detail or guide me in the right directions. We have to give a breakdown of how to do it and 2 refrigerants we would retrofit

Any advice would be greatly appreciated:confused:

[lana]

Hi there,

You did not mention what is the original refrigerant and the replacement.
If you have R12 to R134a then it has its own procedure and some other refrigerants are just drop-ins.

Cheers

[Brian_UK]

With tongue in cheek.....

Try here...

http://tinyurl.com/37bbugg

[johnnymac]

Sorry guys, R12 to R134a and R502 to 404A. I have tryed various sites by googling but they are very in depthy, it just has to be explained in a simple format and thankyou for your replies it is appreciated

[lana]

Hi,

Check this post #11 , I have explained the procedure.
http://www.refrigeration-engineer.com/forums/showthread.php?t=8626

Cheers

[Brian_UK]

Sorry guys, R12 to R134a and R502 to 404A. I have tryed various sites by googling but they are very in depthy, it just has to be explained in a simple format and thankyou for your replies it is appreciated
Sorry, but you do have to read about things sometimes ;); if you just take the synopsis then you don't learn.

[johnnymac]

Thankyou it has made it clearer once you see the process broken down. Yes Brian are right you do have to read them but if you do not do any of this then its a bit difficult to follow.

Appreciate the help fellas