freezy
20-06-2005, 08:23 PM
Hi all,
Went to look at this ceiling mounted unit tonight and found when the controller is pointed at the unit and switched either on or off, the same thing happens.
louvers vibrate as they try to close further, even though they are already closed, for about 5 - 10 seconds. Also the power light(red) glows for about half a second and the unit then does nothing else. It seems like the unit wants to shut down no matter what. Switching power off and on had no effect.
I have read previous posts with similar problems, although not the same, I think it needs a new pcb.
System is only a couple of months old.
Any comments?
Went to look at this ceiling mounted unit tonight and found when the controller is pointed at the unit and switched either on or off, the same thing happens.
louvers vibrate as they try to close further, even though they are already closed, for about 5 - 10 seconds. Also the power light(red) glows for about half a second and the unit then does nothing else. It seems like the unit wants to shut down no matter what. Switching power off and on had no effect.
I have read previous posts with similar problems, although not the same, I think it needs a new pcb.
System is only a couple of months old.
Any comments?