View Full Version : sanyo
WORKER
20-08-2010, 09:11 PM
what 1s a p 12 fault on a sanyo two way muli
WORKER
20-08-2010, 09:28 PM
anybody has fault codes for sanyo? please help,i have a p-12 fault .
Tayters
22-08-2010, 08:43 PM
Try this mate.
http://www.oceanairdist.co.uk/assets/pdf/fault_codes/Sanyo%20Fault%20codes.pdf
Cheers,
Andy.
wilko123
25-08-2010, 04:10 PM
SANYO model AY-X13CR
Know of where i can get grubby mits on manual?
many thanks
james10
25-08-2010, 09:26 PM
have a look on here
http://www.heronridge.co.uk/tech_info.htm
techguy
01-09-2010, 01:46 PM
P12 is a indoor unit fan overload.
On a cassette on first commissioning check is the packing material is still inside the indoor unit
If this has been commissioned and has run for some time. Spin the fan by hand and switch on the remote controller. If the fan runs for a few minutes the PCB is faulty. If the fan does not run probably both fan motor and PCB need replacing (very unusual)
hyperion
01-09-2010, 01:54 PM
Quite normal for the PCB to fail. Just changed eight of them on almost new units that have not been used for a period of time.
Indoor unit DC fan trouble
anybody has fault codes for sanyo? please help,i have a p-12 fault .
P12 is
Indoor unit DC fan trouble
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.