View Full Version : beermaster
martinw58
10-08-2010, 07:42 PM
have a beermaster showing h1 on the display i assume this is a fault code but have no manual have called climate center but was no help
Latte
10-08-2010, 08:18 PM
I think you will find that alarms actually HI (HIGH TEMP) as opposed to H1.
Switch the thing off and start from scratch. does the controller start ok, Condensing unit etc. These things as as simple as they get, apart from p1 (probe fault) the controller wont give any clues whats up
cold.man
10-08-2010, 08:49 PM
i agree with latte
start from scratch what temp was the system on arrival to call?
was condensing unit running? etc
martinw58
10-08-2010, 08:50 PM
the unit starts ok but seems to be over cooling
Latte
10-08-2010, 10:09 PM
define overcooling. whats it set at and whats it pulling down to. Is the display reading the correct temp ?
doormaster2008
19-08-2010, 10:34 PM
if your still having problems replace sensor.it seems to be the main problem with these
martinw58
20-08-2010, 06:43 PM
was geting info over the phone about the unit went to site and checked unit found the air sensor was missing
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.