Triggerman
19-07-2010, 03:48 PM
Greetings!
I have a customer with supply air static pressure trouble. The pickup is mounted in the duct 3/4 of the way down. York recommends 2/3, but that point is inaccessible. When the unit starts in the morning, the static pressure fails to rise and the unit goes down on static pressure fault. Any constructive ideas or help appreciated.
Thanks,
Ben
I have a customer with supply air static pressure trouble. The pickup is mounted in the duct 3/4 of the way down. York recommends 2/3, but that point is inaccessible. When the unit starts in the morning, the static pressure fails to rise and the unit goes down on static pressure fault. Any constructive ideas or help appreciated.
Thanks,
Ben