Rob_Quads
08-07-2010, 11:48 AM
Our FF200E fridge has started to not drop in temp. After reading posts on this forum i read about the fozen ICE issue. I took a look and while there is some ICE there is not much. I have gotten rid of it all which hopefully will make it more effective.
In the fridge there is a panel at the back which I have removed to expose the two vents to the freezer section. The top one has cold out coming out of it which does start to bring down the temp BUT when I put the panel back on I noticed you can't feel the air coming through.
At the top of the panel there appears to be some flap which is closed (has some wires coming out of it) This is blocking the fridge working.
Could this be the fridge not sensing the temp right and not letting the cold air in?
Any ideas?
In the fridge there is a panel at the back which I have removed to expose the two vents to the freezer section. The top one has cold out coming out of it which does start to bring down the temp BUT when I put the panel back on I noticed you can't feel the air coming through.
At the top of the panel there appears to be some flap which is closed (has some wires coming out of it) This is blocking the fridge working.
Could this be the fridge not sensing the temp right and not letting the cold air in?
Any ideas?