PDA

View Full Version : Vector problems


anex
22-06-2010, 03:14 PM
Hello boys, I bought one Carrier Vector but it make some problems. From time to time red light - alarm scream. Every time different alarm number :confused:.
NoNickName
22-06-2010, 04:54 PM
Bad luck. Does the alarm scream for mercy or for terror?
radekklimat
22-06-2010, 04:56 PM
What are the emergency numbers are displayed?
anex
22-06-2010, 09:55 PM
I will check. This unit loose also the refrigerant too fast. I do not know what to do. Do somebody sell Thermoking SMX or SL 200? :confused:
cadwaladr
22-06-2010, 10:20 PM
the condensors can be suspect for leaks,but they are superior to TK thats my opinion
moggy66
23-06-2010, 12:29 AM
the condensors can be suspect for leaks,but they are superior to TK thats my opinion


Mine too:)
BRM
23-06-2010, 02:43 AM
Mine too:)
mine too the last thing I think anyoine needs is an smx
radekklimat
23-06-2010, 02:46 PM
If it is not enough gas to do this nitrogen pressure test, if something is not as it should be a leak and then remove the fill factor.
abbsnowman
26-06-2010, 06:44 AM
Before you talk about replacing the unit, repair it properly and see how you like it. Then descide.
Boss302
12-07-2010, 06:40 PM
Before you talk about replacing the unit, repair it properly and see how you like it. Then descide.
I agree, the codes are most likely all related to the refrigerant leak.
chris vickers
14-07-2010, 08:30 PM
sensor plugs on processor fault
anex
15-07-2010, 11:54 AM
Boys, thank you for your help. Please tell me what this errors means:
-A41 engine stalled
- A12 high cool...
A 71 bad F2 or F3 fuse.
Can I have full list of my vector errors. Can somebody send me on: tonykostadinov@abv.bgfile:///C:/Documents%20and%20Settings/Tony/Desktop/carrierProb.JPG
Also I have dysfunction of the element which speed up the engine. Please see the attached image.
Best regards
cadwaladr
16-07-2010, 11:43 AM
Boys, thank you for your help. Please tell me what this errors means:
-A41 engine stalled
- A12 high cool...
A 71 bad F2 or F3 fuse.
Can I have full list of my vector errors. Can somebody send me on: tonykostadinov@abv.bgfile:///C:/Documents%20and%20Settings/Tony/Desktop/carrierProb.JPG
Also I have dysfunction of the element which speed up the engine. Please see the attached image.
Best regardsa12 is high coolant/water temperature,check the thermostat or leave it out to test,is the solenoid for speed control blowing the fuse,disconnect the solenoid ,does it still blow the fuse if not the solenoid needs replacing.unit stalled can be a number of things,fuel prob generator fault.