v500 electric fault

[shaun220]

I have a v500 2008. not working on electric. display goes through check then screen goes blank. 12v unit. good 3 phase good 12v changed micro p, transformer and cab controller no good. any ideas??

[cadwaladr]

have you checked output from bridge rectifiers

[shaun220]

yes I have a good 12v tried it with an old fashioned test lamp...

[cadwaladr]

does it work ok on truck mode?

[shaun220]

Put a brand new processor in and its working fine now. x1 and x4 feed the micro.p with 12v ac then the unit knows its on elec. I did swap microp from another truck that dint make a difference but the new one worked???

[cadwaladr]

what cost was the micro,retail price

[moggy66]

Put a brand new processor in and its working fine now. x1 and x4 feed the micro.p with 12v ac then the unit knows its on elec. I did swap microp from another truck that dint make a difference but the new one worked???


A real tech would have repaiered the board:D:D:D:D:D:D:D

[cadwaladr]

a real tech would have run away,tk shi!!

[abbsnowman]

Moggy, shame on you. LOL

[shaun220]

1200 euro for micro p......

[shaun220]

Moggy... At over 1000euro it would of been more expensive for me to repair the micro p.... On my wages..

[moggy66]

whats that in real money?