PDA

View Full Version : XDS SR alarm code


lakustavd
29-03-2010, 10:57 PM
Help! What wipe emergency codes 74 and 77 ?
Toosh
30-03-2010, 08:54 PM
Help! What wipe emergency codes 74 and 77 ?

What is a XDS SR more info is needed
lakustavd
31-03-2010, 11:11 AM
needs guard access manual
gravy258
02-04-2010, 03:18 AM
a XDS SR is the fore runner to the TS500
basically a TS500 in a RD11 frame.

To clear these alarms, which are nothing but maintenance reminders, scroll thru the first screen using the around key to DDUR 45 then press and hold the TK key till the next screen comes up.
Turn off the hour meters by scrolling the first option to Zero. Or carry on thru and reset the hourmeter counter to zero. then keep on scrolling thru till you see your alarms then press equals to clear.
intelligence
29-04-2010, 10:53 PM
if you problem is not resolved yet. post again. i will help you
radekklimat
01-05-2010, 09:33 AM
EPROM checksum. The controller may be damaged, repair before loading. Error 77

Microprocessor passed to the default setting. Unit set again, control the temperature may be inaccurate, repair before loading. Error 74