cornilius zenith 900 bottle cooler re-gas question

[jack-ice]

Hi,
I have a cornilius zenith 900 bottle cooler running on R134a which i want to regas. Im used to working on systems with hi/low side charging points but this only has 1 port on a 4 inch pipe going into compressor. Is this a low side charge point?

Many thanks....

[tonto33]

yes sure is

[jack-ice]

thank you very much

[jack-ice]

what is the correct procedure set up to reclaim with only 1 port as i am used to using the push pull method but with only 1 port whats the best way to do it?

[nike123]

what is the correct procedure set up to reclaim with only 1 port as i am used to using the push pull method but with only 1 port whats the best way to do it?
Connect your suction side of reclaim unit to that port and in 10 min you are finished!

[Andy AC]

Do yourself a favour and change the filter drier + blow capilary through with ofn first. That's probably whats giving you low gas symptoms - partial or total restriction. Clean the condenser, change the fan, and clean the mesh filter in the tray underneath - it may live again.

Andy

[nike123]

Do yourself a favour and change the filter drier + blow capilary through with ofn first. That's probably whats giving you low gas symptoms - partial or total restriction. Clean the condenser, change the fan, and clean the mesh filter in the tray underneath - it may live again.

Andy

What makes you think that there is some problem.
It is nowhere in this thread said that there is any problem.

[jack-ice]

yeah sorry the problem is that the compressor is not kicking in and ive checked the supply to the compressor and getting 440v so was thinking either the compressor has siezed, low on gas, or thermostat problem....im new to the domestics side im used to car a/c and large fridge plants so still learning.