PDA

View Full Version : carrier manual


metricwrench
25-03-2010, 09:28 PM
I got 2 van with CARRIER 30s unit on them, they will need service, How & where do I get service manual?
(#1=PB521401, #2 324001 )
THANKS for any input wrench
Toosh
25-03-2010, 11:18 PM
I got 2 van with CARRIER 30s unit on them, they will need service, How & where do I get service manual?
(#1=PB521401, #2 324001 )
THANKS for any input wrench

Try here

http://eto.carrier.com/lit.asp

opps just noticed its for a van this site no good for that
carrier_trained
27-03-2010, 04:22 AM
Wrench is refering to a off engine drive unit on a van, that link is for domestic and comercial products, thanks for that, been looking for that info, cheers:D
Toosh
27-03-2010, 06:30 AM
Wrench is refering to a off engine drive unit on a van, that link is for domestic and comercial products, thanks for that, been looking for that info, cheers:D

Thats why I made the addition after realizing what he wanted and you are welcome:D
metricwrench
27-03-2010, 10:53 PM
Thankssssssss guy for keeping looking, it really appreciated.
wrench
carrier_trained
28-03-2010, 12:03 AM
Dont you check your private messages? i asked for your email, because i have a diagram for that unit.:rolleyes:
Toosh
28-03-2010, 03:39 AM
Dont you check your private messages? i asked for your email, because i have a diagram for that unit.:rolleyes:

He can`t get pm`s he needs 15 posts you can use his V card to send, click on his name then contact info then scroll to you see V card
carrier_trained
28-03-2010, 05:31 AM
Ok, silly conditions on this forum, makes it very hard to communicate with people, anyway i have sent him the required info, will see if he replys.;)
metricwrench
31-03-2010, 03:55 PM
Ok, silly conditions on this forum, makes it very hard to communicate with people, anyway i have sent him the required info, will see if he replys.;)

Yep I received the infos, & reply to emai to thankssssss.
It's very appreciated, THANKSSSSSS very much.
wrench
PS: will work on the 15 post!!!!!
thanks again