r0ss
01-02-2010, 05:34 PM
Ive never used this manufacturer before but went to fire up 2 units off 1 condenser (model FDCP408HES3B) today and got a bit stumped.
We had a couple of guys pump down and reposition 2 units. They have connected it all back together but it was my job to vac it and put the gas back in today.
After i opened the valves i switched the test mode dip switch and went downstairs to see how they were working in both heating and cooling. They were working the nuts. So back to the condenser i went to switch it off test and pack my gear up.
Final checks of the units before i went i turned the units on at the local remote however the units wouldnt kick in either heating or cooling.
As the test mode proved everything worked very well, i dont really know what it could be as i work mainly on the city multi / daikin vrvs
Hopefully someone has experienced something like this before so i can go armed tomorrow with a bit more knowledge.
Cheers guys
We had a couple of guys pump down and reposition 2 units. They have connected it all back together but it was my job to vac it and put the gas back in today.
After i opened the valves i switched the test mode dip switch and went downstairs to see how they were working in both heating and cooling. They were working the nuts. So back to the condenser i went to switch it off test and pack my gear up.
Final checks of the units before i went i turned the units on at the local remote however the units wouldnt kick in either heating or cooling.
As the test mode proved everything worked very well, i dont really know what it could be as i work mainly on the city multi / daikin vrvs
Hopefully someone has experienced something like this before so i can go armed tomorrow with a bit more knowledge.
Cheers guys