View Full Version : Fans
chemi-cool
05-01-2010, 07:48 PM
Condenser fans, evaporator fans
What make are you buying?
Who to your opinion is a good manufacturer, and why?
I have had enough with low cost and low quality fans from the far, far east.
multisync
05-01-2010, 08:11 PM
Most cheap fans for us are Italian? Ma-vib etc
monkey spanners
05-01-2010, 09:02 PM
For old prestcold stuff i have been fitting Remco motors lately and not had any problems with them, but to be honest i never had any problems with the Lemac ones i used to use, but the Remco ones look nicer :D
For shaded pole motors i've just started using FMI motors which are multi fit and come with a selection of screws/nuts etc to make fitting easier. My local wholesaler says he had least problems with CE Set (spelling?) but has problems getting them now.
On other stuff i just get original parts or whatever the wholesaler has that fits :D
Peter_1
05-01-2010, 10:04 PM
I have very good experience with cheap Rotomatika's
Colin G
05-01-2010, 10:15 PM
what make are the cheap multifits out climate center?
craigpcg
05-01-2010, 10:35 PM
what make are the cheap multifits out climate center?
They used to be elcold i think there called BUT they have been changed for power house and they are fanstatic out of about 100 iv have 1 faulty and it was due to me cracking the white plastic thing the fan blade sits on.
About £1.00 dearer depending on wattage but 100times better.
Much longer cords on the and they come in a nice box so there not rolling about ur van
Colin G
05-01-2010, 10:37 PM
they seem ok, we have been using them for the last year or so and i havnt changed any of them since except for one that had a jammed blade, could fry an egg on that one i tell ye!
cadwaladr
06-01-2010, 12:10 AM
ebm are the daddy,you pay the price you take your choice, remco are good never had a premature one yet in 25 years.
coolhibby1875
06-01-2010, 08:31 AM
Hi colin the multifits that climate edinburgh sell are pump house motors i havent had any problems with them, but personaly i prefer the ebm multifits they cost more but last for ever!
paul thompson
07-01-2010, 05:30 PM
we,ve always used ebm multifit motors ( 10w , 16w , 25w ). fit 100,s in a year with no problems .our local supplier has changed from stocking ebm to pump house .with a little label MADE IN CHINA .ALREADY had 10 fail on us in the 1st 3 months .not looking too good . we are going to give the pumphouse ones the elbow .:p
123-steve909
07-01-2010, 09:06 PM
ebm are the daddy,you pay the price you take your choice, remco are good never had a premature one yet in 25 years.
i agree
i have fitted over 1000 ebm papst motors with no problems, elco and pumphouse are poor quality but you get what you pay for
samiam
08-01-2010, 12:55 PM
EMBpapst fans - speed control and motor protection included on the motor elecronics of certain models
samiam
08-01-2010, 12:57 PM
Sorry, the reason I choose motors (with fans blades included) = becos they blushless type = energy savings.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.