View Full Version : Belts Pulleys and drive shafts
Deano240
27-09-2009, 09:00 PM
My engineer has told me to look up information the above i cant find nothing? can some one point me in the right direction please ?
thanks
Brian_UK
27-09-2009, 11:04 PM
Don't really know what to say.
Most people use Google for this sort of task.
Also, what is it you want to know about "Belts, Pulleys and Drive Shafts"?
Pulleys fit on drive shafts and belts connect the pulleys.....
Magoo
27-09-2009, 11:55 PM
Deano 240.
D1 x N1 = D2 x N2.
D= diameter N = Speed
example motor speed at 1450 rpm.
motor pulley at 200 mm. Compressor flywheel at 300 mm, equals compressor speed at N2.
N2 = 1450 x 200 / 300 = 966.66 rpm.
magoo
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.