irrational
26-09-2009, 12:59 PM
Hi,
We have a Zanussi ZI 918/9 FFA Refrigerator-Freezer about 2 years.
Have noticed that the fridge part if not cooling to the right temperature recently. And today, it went completely fubar.
The settings are freezer is at -30 and fridge is at +12.
I cannot change these. Turning the fridge and freezer thermostat control knob temporarily chenged the indicated temperature (the temperature on the display flashes while it does this). But within seconds, it reserts back to the -30/+12 settings mentioned above.
So basically, all the food in the freezer is fine but all of the food in the fridge is going off very quickly as it's not being refrigerated properly.
Is the unit buggered or can anything to be done to reset/fix whatever has gone wrong?
One suggestion i've read is turning is off for 24/48 hours to allow the sensors reset but i only want to do this as a last resort as i'll have to figure out what to do with all the frozen goods in the mean time.
Thanks in advance for any advice.
Daithí
We have a Zanussi ZI 918/9 FFA Refrigerator-Freezer about 2 years.
Have noticed that the fridge part if not cooling to the right temperature recently. And today, it went completely fubar.
The settings are freezer is at -30 and fridge is at +12.
I cannot change these. Turning the fridge and freezer thermostat control knob temporarily chenged the indicated temperature (the temperature on the display flashes while it does this). But within seconds, it reserts back to the -30/+12 settings mentioned above.
So basically, all the food in the freezer is fine but all of the food in the fridge is going off very quickly as it's not being refrigerated properly.
Is the unit buggered or can anything to be done to reset/fix whatever has gone wrong?
One suggestion i've read is turning is off for 24/48 hours to allow the sensors reset but i only want to do this as a last resort as i'll have to figure out what to do with all the frozen goods in the mean time.
Thanks in advance for any advice.
Daithí