PDA

View Full Version : Smart Sensor Carrier


Martu
03-09-2009, 01:17 AM
Hello. I have a Carrier Smart Sensor (mod. ZONECC), and i need select the correct zone number (zone 2 by default). And i don't know how to enter to set mode.
Please help me!!!!!!
Thanks!
Martu.
goshen
03-09-2009, 04:35 AM
hi there try this:
http://www.docs.hvacpartners.com/idc/groups/public/documents/techlit/omzonekit-3.pdf
Martu
03-09-2009, 12:48 PM
I have this manual, but i need the Smart Sensor Manual.
Thanks Goshen!
goshen
03-09-2009, 08:49 PM
try these
http://www.eurohvac.com/pdf/zonesms-1si.pdf
http://www.strongsvilleheating.com/PDF/Comfort%20Zone%20II%20Product%20data.pdf
i hope these are of use
Martu
03-09-2009, 10:53 PM
Goshen:
Sorry, i have the Smart Sensor that appears in the second manual, but it does not explain how the zone is changed.
Thanks!
Brian_UK
03-09-2009, 11:14 PM
Which model sensor do you have?
Martu
04-09-2009, 02:04 PM
Brian:
Hi. The model is
CARRIER ZONECC0SMS01
Thanks!
Brian_UK
04-09-2009, 11:59 PM
Try this Owners Manual... (6+MB)

http://www.docs.hvacpartners.com/idc/groups/public/documents/techlit/omzonekit-3.pdf
Martu
05-09-2009, 12:08 AM
Thanks Brian, but in this manual only explains how change the temperature of the Smart Sensor.
Thanks!


[QUOTE=Brian_UK;159635]Try this Owners Manual... (6+MB)
Brian_UK
05-09-2009, 01:13 PM
Thanks Brian, but in this manual only explains how change the temperature of the Smart Sensor.
Thanks!
So the instruction in the manual which states that "You press the next zone button" doesn't apply to your model then?
Martu
07-09-2009, 03:17 AM
Brian:
This is applied for the USER INTERFACE, but for the SMART SENSOR, it is different, i only have 3 buttons (HOLD, OUT and SET TEMP).


So the instruction in the manual which states that "You press the next zone button" doesn't apply to your model then?