Alarm 10 SB210

[shabusasami]

Anyone help me

My unit show Alarm 10 now I 've check fuse F1 and try to operate directly from Swith High pressure, but Alarm still reoccured.

I 've changed Solenoid stop fuel. The Alarm cannot be cleared yet.

Any suggestions

Thanksssss

[DaButcher]

Anyone help me
My unit show Alarm 10 now I 've check fuse F1 and try to operate directly from Swith High pressure, but Alarm still reoccured.
I 've changed Solenoid stop fuel. The Alarm cannot be cleared yet.
Any suggestions
Thanksssss


I assume that the code is setting before unit cranks

According to revision it could be fuse F25 or F1
low battery voltage will cause this alarm

If assumption is wrong and alarms sets after it starts, report back