View Full Version : Samsung AQV12VBAN extension of temperature probe cable?
Vasilis
02-08-2009, 04:41 PM
Hello ,
I have two Samsung AQV12VBAN units and i would like to extend the cables of the in door temperature sensor so the unit can sense the temperature at 1,5 meters high.
Is it a difficult job ? do i have to dismount the unit in order to do it properly ?
superswill
02-08-2009, 04:57 PM
yes this can be done and is quite simple,the return air sensor is located top right under the glass frontage,from memory these have an throw of 8m3/min so be careful to not over work the system
see this link for tips
http://www.refrigeration-engineer.com/forums/showthread.php?t=12522&highlight=return+cable
always isolate and tag electrical source before under taking this kind of work
Vasilis
02-08-2009, 05:14 PM
Forgot to say that i am not an electrician or ref. technician :D
The idea is to unscrew the old sensor (which has a short cable) , get it out of the unit , go to a specialty a/c shop and buy an identical sensor with longer cable which i will screw it back in place.
Is this possible to be done by me ? I guess that a new longer sensor would not cost more than 10 euro... The problem is that i can't see where the existing sensor cable is plugged in (not enough space to check and play).
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.