View Full Version : door gaskets
chillyblue
14-07-2009, 02:51 PM
Hi
Does anybody know where i can get magnetic/non magnetic door gaskets for commercial cabinets in the UK.
I have no cabinet details as there are none, only existing door gasket dimensions.
I have tried RPW.
many thanks
CB
philfridge
14-07-2009, 06:03 PM
Have you tried Hrp think they do some gaskets
Grizzly
14-07-2009, 09:32 PM
Hi chillyblue.
Follow the link below.
I personnaly have never yet used them.
But I kept their details as they have pretty pictures of door gaskets and more, on their website.
I knew it would come in handy one day!
Grizzly
http://www.eurocateringparts.com/acatalog/catalogbody.html
Try this company very good for made to measure door seals.
http://www.collins-extrusions.co.uk/
Andy W
15-07-2009, 07:46 AM
Collins extrusions make just about any gasket that you want, only problem is they do not give a warranty and when they fall in bits after a month they dont want to know and will avoid you for as long as necessary.
Grizzly
15-07-2009, 07:35 PM
Try this company very good for made to measure door seals.
http://www.collins-extrusions.co.uk/
Thanks for the good link.
Hows tricks?
Grizzly;)
Northdude
15-07-2009, 10:47 PM
ascateringsupplys.com are usually ok
chillyblue
16-07-2009, 04:13 PM
Collins extrusions make just about any gasket that you want, only problem is they do not give a warranty and when they fall in bits after a month they dont want to know and will avoid you for as long as necessary.
Oh dear that dosen't sound good, i've just contacted them. Are they that bad??
Thanks for your help.
CB
Andy W
16-07-2009, 04:23 PM
They were always excellent in the past, couldnt fault them, then I had a problem and they didnt want to know, tried to palm me off, avoided my phone calls, never returned my calls, extended holidays etc, no one else could deal with it, I had them all.
I eventually had to fork out again at my own cost to keep my customer happy, it was only a £50 gasket but it was the principle, not dealt with them since.
chillyblue
16-07-2009, 04:48 PM
not dealt with them since.
Who do you use know then??
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.