polar ice machine production problem

[Huge]

one ice machine with correct gas load starts off making good ice then decides to make a few good lumps and a few light lumps and part lumps. Anyone out there ever had this problem and perhaps can give me a clue.

[lowcool]

shes a farked


imagination is stretching slowwwly

[milkybar33]

It could be one of many things that at fault, do you have any more info, temps, gas pressures etc???

[1mikeefc1]

if it has correct gas charge in it i would suspect oil or restriction in the evap> hope this helps

[Slatts]

Water leaks?
Either cracked tank, leaking hose or valve or water dripping off the plate if it's dirty and has crap built up on it directing the water away from the tank.
This'll cause it to either run out of water before it makes a full plate of ice or add warm water to the tank if it works that way.
Sorry, not familiar with your machine.
If you publish more info it'd make it easier for us.