Lumpy2
01-06-2009, 11:42 AM
Hi,
I have a main board from the above unit to repair for a friend. I has some damage to two 25V supply capacitors, CPS28 - CPS22, but no burnt tracks or obvious faults or cracks on the board.
The main board number is: PC0104H-1D.
The high voltage [400VDC] capacitors, CPs1 - C11, seem OK and measure at rated values.
Does anyone know where I can source a schematic for this board and what faults might be common on this main board.
The unit is a ducted single phase system.
There is some residue on the board from geckho's and small mice which will be cleaned off.
Regards,
KH
I have a main board from the above unit to repair for a friend. I has some damage to two 25V supply capacitors, CPS28 - CPS22, but no burnt tracks or obvious faults or cracks on the board.
The main board number is: PC0104H-1D.
The high voltage [400VDC] capacitors, CPs1 - C11, seem OK and measure at rated values.
Does anyone know where I can source a schematic for this board and what faults might be common on this main board.
The unit is a ducted single phase system.
There is some residue on the board from geckho's and small mice which will be cleaned off.
Regards,
KH