View Full Version : Dixell Controller Probe Length?
Hi everyone,
Can anyone help me out with the maximum probe length for a small Dixell Prime controller XR20CXB.
Any information will help.
Thanks.
dsp
chemi-cool
22-05-2009, 08:55 PM
The maximum I have used was about 50 meters.
I believe you use a longer cable.
Contact the manufacturer for specific instructions.
You have to bare in mind though that the resistance of copper wire changes with temperature.
Thanks,
I thought appox. 50m should be Ok.
I am mindfull of the resitance change with temperature.
dsp
Yuri B.
23-05-2009, 01:03 PM
With 1,5 mm cross section copper wire cable you may be quite sure.
lowcool
24-05-2009, 05:42 AM
fitted one this morning,pretty sure 100m in shielded cable
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.