christian#1
12-05-2009, 05:51 PM
Greetings to you all,
Up untill now i have been a silent user of this site but thought its time i registered.
Got to the chiller in question today, tripped on lp, ran it just to see, 5psi suction. had a good visual, electronic leak detection and reclaimed 8kg. Advised that other contractors have carried out lots of previous work and compressor has been re-conned. Found tons of oil under jacket of exchanger slight rust on welds but unable to pick anything up with leak spray or electronic leak detector pressure tested ofn 15 bar and watched/sprayed for an hour or so. pressure held throughout, small leak i guess. Returning in the am. anybody else worked on one of these? euroklimat 601 series raa. changing exchanger looks a nightmare... any advice on where to get parts?
Up untill now i have been a silent user of this site but thought its time i registered.
Got to the chiller in question today, tripped on lp, ran it just to see, 5psi suction. had a good visual, electronic leak detection and reclaimed 8kg. Advised that other contractors have carried out lots of previous work and compressor has been re-conned. Found tons of oil under jacket of exchanger slight rust on welds but unable to pick anything up with leak spray or electronic leak detector pressure tested ofn 15 bar and watched/sprayed for an hour or so. pressure held throughout, small leak i guess. Returning in the am. anybody else worked on one of these? euroklimat 601 series raa. changing exchanger looks a nightmare... any advice on where to get parts?