Standard Pressure Readings

[johanine1]

Good Day Again!
Can you please help me, I need to know what should be the standard pressure reading (suction and discharge) in a compressor installed for a freezer. Thanks.

[amitsaxena]

Dear Can you let us know which ref you are working with.

[nike123]

Pressures are depending on evaporator and condenser TD and on temperatures inside freezer and in ambient, and last, on used refrigerant.
Evaporator and condenser TD depend on material used and type (passive, forced air) of heat exchanger, conditions of exchanger (clean, dirty, iced etc....), location height from sea level etc.....

[Brian_UK]

Good Day Again!
Can you please help me, I need to know what should be the standard pressure reading (suction and discharge) in a compressor installed for a freezer. Thanks.
Unfortunately not enough information given to formulate a sensible answer.

In short, there is no standard answer to your question.

If, however, you relate your temperatures to a refrigerant then you may find some suitable pressures for your answer.