karl957
19-03-2009, 11:54 AM
Please can somewone explain how to do the following check.
If the compressor is OK check the inverter output voltages are all equal.
Do you measure voltage between earth and start or run winding/pin on compressor while operating unit to check output voltages are equal or do you need to disconnect terminals from compressor and where do you put your test probes from multimeter?
Thanks for all assistance.
If the compressor is OK check the inverter output voltages are all equal.
Do you measure voltage between earth and start or run winding/pin on compressor while operating unit to check output voltages are equal or do you need to disconnect terminals from compressor and where do you put your test probes from multimeter?
Thanks for all assistance.