View Full Version : London rates
I am being increasingly asked to install air conditioning in the London area. To date I have kept busy in this rural farm backwoods.......with its share of tight fisted souls...
Now, I am quoting for a job in Docklands, on a new development on the 7th floor
I dont wish to get my fingers burnt, so would any engineers from that part of the woods......or concrete shall I say, care to divulge how much I should estimate the work at.
Requirement is for 2 X wall mounted heat pumps for bedrooms, approx 2 systems, to 3Kw each, and one larger wall mount 5Kw for the lounge.
Arrangement is straightforward back to back.
Im not clued up on London rates, and I dont want to quote the going Midlands prices.....I also need to bear in mind the travel and logistics of working in London will be very very different.......
Those are some nice pics Marc.......keep them rolling . I really enjoy seeing them.
A picture tells a thousand words........
Abseiler.......the ingenuity of Fridgetech. com never fails to amaze me!!!
Hey marc......can I work for you........for free!!!! :)
Mark C
22-04-2004, 01:28 PM
Out of curiousity, what would the hourly rate be considered to be? They are currently charging $65 per hour here in Atlanta.
WebRam
22-04-2004, 09:46 PM
Aiyub is right, photos work far better than the printed word, and this case proves it. Lets have more of the same :)
WebRam
22-04-2004, 10:10 PM
OK OK, mutter Prozac mutter looking for my dictionary mutter ;)
Bones
25-04-2004, 06:42 AM
looks like a pretty steep hole to fall into marc, and you wouldnt want that spear to jab you if you hit the bottom :) dont blame you for opting for abseilers.
how many stories down was the pipe run? not sure if i can just make out the bottom there?, or if thats the black hole point lol.
Dave Goodings
25-04-2004, 12:19 PM
Hello marc
Didnt notice any oil traps in your pipework? how many floors down is the evaporator? we use rats sometimes Rope Access Technicians Lol
Regards
Dave G
rbartlett
25-04-2004, 02:22 PM
you've started something there...;-)
cheers
richard
Peter_1
25-04-2004, 08:19 PM
Was just thinking on the same question.
Yes, why?
Dave Goodings
26-04-2004, 11:16 PM
Hello Marc
Sorry I didnt read the article on oil traps I was thinking that any oil in the system would accumulate in the evaporator maybe seizing the compressor but i take it that with the higher velocities and also working in heat mode you do not get this problem putting a simple loop in the bottom of the leg when it starts to fill with oil the velocity of the gas will start to entrail it without getting slugs i didnt realize that these manufacturers say you do not need traps?
Regards
Dave G
Dave Finlay
28-04-2004, 07:54 PM
Are the "Traps" to catch the "Rats" ????
with Installations like that i am glad london is just a dot on the map. We Northerners dont do heights!!!!!! :eek:
rbartlett
28-04-2004, 07:58 PM
the guy in the pics was from liverpool..;-)
usual comments need not apply...
cheers
richard
absrbrtek
28-04-2004, 11:51 PM
And I was planning on shooting across the pond to work with you. I guess that aint gonna happen if you cant even take on FREE help. Oh well!!! :cool:
Bout time you got my posting to work!!!
not sure if i can just make out the bottom there?, or if thats the black hole point lol.[/QUOTE]
Looks more like the black hole in Culcutta :D
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.