View Full Version : Distributer nozzel orifice number
botrous
04-12-2008, 07:20 PM
Hey guys how are you doing???
Can anyone help to convert the sporlan distributers orifice numbers into mm or inch?
ex: 1/9 ==> . . . . Inch
50 ==> . . . . Inch
Please help urgent
Best respects and regards
Brian_UK
04-12-2008, 11:55 PM
Sorry Botrous I don't recognise those sizing numbers.
Sporlan seem to use 'letters' according to the documents that I've seen..
http://sporlan.jandrewschoen.com/20-10.pdf
edit: correction, I've just seen 1/9...
http://sporlan.jandrewschoen.com/20-10-1.pdf
narkom
07-12-2008, 06:00 PM
Nice links, Brian_UK, thank you very much!
botrous
08-12-2008, 10:02 PM
Thanks for your interest brian but I still can't convert the orifice number to a unit of measurment :(
thanks for your support
respects and regards
Magoo
07-01-2009, 12:35 AM
Hi Botrous
In the dim dark back of my mind an old engineer said the orifice sizes related to an American drill gauge numbering system, definitly imperial.
Hope this helps.
magoo
BobTheBull
07-01-2009, 11:26 PM
I see you're in Lebanon so this might not be easy, but why don't you call Sporlan TS? I have found them to be very helpful. If this relates to some old equipment they may have to get back to you, but I have never not gotten the information I needed.
While writing this, it occurs there should be a way to contact TS through their website. Being in the States with the cell phone always handy it's easy to just dial them up, but the internet TS is there for those who don't have that as a ready option.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.