View Full Version : Saying Hello

12-11-2008, 06:41 PM
Well I found this forum completely on accident when doing some searching for single stage phase change systems and since I'm always looking for more ways to learn about refrigeration in order to build my own I decided to register. Well below I will list the specs of the components I've chosen/found available and I will try to get photos up as soon as I can. :D

Compressor: Danfoss NF7FX
Condensor: 6"x6"x4.5" cube condensor
Evaporator: Kayl evap with mounts
Tubing: 10' 1/4" copper tubing
10' of 3/8"
10' 0.031" captube
4' of copper flex tubing from Under-the-Ice
5/16" copper studs for flex line
spun copper filter/dryer

My plan was to run R507a and for this system to be a learning basis so that I can build a few more units before attempting to possibly build a cascade system in the future.

12-11-2008, 07:15 PM
Hi and welcome to the forum, enjoy :)

16-07-2010, 09:52 AM
thank you for you here